View source for Changing the Imote2 CPU Frequency

From Cyber-Physical Systems Laboratory

← Changing the Imote2 CPU Frequency

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

See: http://tech.groups.yahoo.com/group/intel-mote2-community/message/87 Basically, you wire interface DVFS of component DVFSC (defined in tinyos-1.x/tos/platform/imote2/DVFSC.nc) and make the following call: <pre> call DVFS.SwitchCoreFreq(416,208); //call DVFS.SwitchCoreFreq(208,208); //call DVFS.SwitchCoreFreq(104,104); // Change the CPU and bus frequencies to 104MHz. This // also changes the voltage to the minimum amount needed // to support this speed. // // This was copied from: // contrib/imote2/test/TestSensorboard\TestSensorboardM.nc // // DVFS is defined in: // tinyos-1.x/tos/platform/imote2/DVFSC.nc </pre>

Return to Changing the Imote2 CPU Frequency.