Difference between revisions of "Toggling a TelosB ADC Pin"

From Cyber-Physical Systems Laboratory
Jump to navigationJump to search
(New page: First do this in StdControl.init(): <pre> TOSH_MAKE_ADC3_OUTPUT(); </pre> To set the pin high: <pre> TOSH_SET_ADC3_PIN(); </pre> To set the pin low: <pre> TOSH_CLR_ADC3_PIN(); </pre>)
 
Line 1: Line 1:
 +
== TinyOS 1.x ==
 
First do this in StdControl.init():
 
First do this in StdControl.init():
  

Revision as of 01:11, 22 September 2009

TinyOS 1.x

First do this in StdControl.init():

TOSH_MAKE_ADC3_OUTPUT();

To set the pin high:

TOSH_SET_ADC3_PIN();

To set the pin low:

TOSH_CLR_ADC3_PIN();