Difference between revisions of "Tips on Using Imote2"
From Cyber-Physical Systems Laboratory
Jump to navigationJump to search| Line 1: | Line 1: | ||
* [http://sensorweb.vancouver.wsu.edu/wiki/index.php/Tinyos#Install_Imote2_in_tinyos-1.x Washington State University] has a great wiki with instructions on how to configure your platform to support the Imote2. | * [http://sensorweb.vancouver.wsu.edu/wiki/index.php/Tinyos#Install_Imote2_in_tinyos-1.x Washington State University] has a great wiki with instructions on how to configure your platform to support the Imote2. | ||
* The Imote2 uses the FTDI USB chip whose drivers may be downloaded [http://www.ftdichip.com/Drivers/VCP.htm here]. | * The Imote2 uses the FTDI USB chip whose drivers may be downloaded [http://www.ftdichip.com/Drivers/VCP.htm here]. | ||
| + | * Use USBLoaderHost.exe to program an image onto the Imote2. This program is located in $TOSROOT/contrib/imote2/tools/bin/. | ||
* [[Toggling an External Pin on the Imote2]] | * [[Toggling an External Pin on the Imote2]] | ||
* When sending over UART, make sure the debug board is connected. | * When sending over UART, make sure the debug board is connected. | ||
Revision as of 20:04, 22 September 2008
- Washington State University has a great wiki with instructions on how to configure your platform to support the Imote2.
- The Imote2 uses the FTDI USB chip whose drivers may be downloaded here.
- Use USBLoaderHost.exe to program an image onto the Imote2. This program is located in $TOSROOT/contrib/imote2/tools/bin/.
- Toggling an External Pin on the Imote2
- When sending over UART, make sure the debug board is connected.
- In TinyOS, TOS_LOCAL_ADDRESS is the last 2 digits of the mote id in hex
- Even though the default maximum message size is 29 bytes, the Imote2 will only send a message if it has an even length. The call to GenericComm.sendMsg will actually return FAIL if you try to send a 29 byte long packet.
- Size of local variable array is very small. If you want to use a large array, you need to declare it globally. E.g. realA, PS, W arrays.
