Equipment for course projects

The following is a list of sensor network equipment available for use in students' course projects.

Raspberry Pi Family

Raspberry Pi 1, Model B:

Quantity: 10

Raspberry Pi 2/3, Model B+:

Quantity: 1 for RP2 , 2 for RP3

Know more about differences among models: Which Model Should You Buy

USB WiFi Adaptors: 6

Note: The RP1 and the RP2 have no embedded WiFi chip. That is, you need use Ethernet cable for accessing the Internet, or to use an additional USB Wifi adaptor for wireless accesses.

The RP3 has equipped with WiFi chip and Antenna. You don't need an extra Wifi Adaptor for RP3.

TelosB-Family

• TelosB data sheet

At a high level the TelosB motes have: IEEE 802.15.4 radio, TI MSP430 uProcessor, Integrated antenna, Integrated USB (no need for a programming board).

Sensors: Temperature, light, and humidity.

Quantity: 41

The Tmote Sky and TelosB are functionally equivalent. Any hardware or software information about the TelosB motes also applies to the Tmote Sky.

Robots

• LEGO Mindstorms Education Base Set,

LeJOS firmware:File:Lego.pdf

Quantity: 2

Other Available Equipment

• NSLU2 Network Storage Link ("Slug"),

Quantity: 13

(Linux firmware/hardware hacking information)

• Protoboards (Breadboards)

Quantity: 4

• Wall plug to USB adapter

Quantity: 29

• Particle sensor

Specs

Quantity: 1

• Motion sensor

Works by PIR (Passive InfraRed) Desc.

Quantity: 16

• AC Zone dampers

Desc.

Quantity: 1

• Programmable AC vent

Desc.

Quantity: 7