Difference between revisions of "Tips on Using Imote2"

From Cyber-Physical Systems Laboratory
Jump to navigationJump to search
(New page: * When sending over UART, make sure the debug board is connected.)
 
Line 1: Line 1:
 
* When sending over UART, make sure the debug board is connected.
 
* When sending over UART, make sure the debug board is connected.
 +
* In TinyOS, TOS_LOCAL_ADDRESS is the last 2 digits of the mote id in hex

Revision as of 19:09, 16 January 2008

  • When sending over UART, make sure the debug board is connected.
  • In TinyOS, TOS_LOCAL_ADDRESS is the last 2 digits of the mote id in hex