Tips on Using Imote2

From Cyber-Physical Systems Laboratory

Revision as of 02:25, 24 January 2008 by Liangfok (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Washington State University has a great wiki with instructions on how to configure your platform to support the Imote2.
Toggling an External Pin on the Imote2
When sending over UART, make sure the debug board is connected.
In TinyOS, TOS_LOCAL_ADDRESS is the last 2 digits of the mote id in hex

Retrieved from "http://wsn.cse.wustl.edu/index.php?title=Tips_on_Using_Imote2&oldid=469"

Navigation menu