Tips on Using Imote2

From Cyber-Physical Systems Laboratory
Revision as of 02:28, 24 January 2008 by Liangfok (talk | contribs)
Jump to navigationJump to search
  • Washington State University has a great wiki with instructions on how to configure your platform to support the Imote2.
  • The Imote2 uses the FTDI USB chip whose drivers may be downloaded here.
  • Toggling an External Pin on the Imote2
  • When sending over UART, make sure the debug board is connected.
  • In TinyOS, TOS_LOCAL_ADDRESS is the last 2 digits of the mote id in hex
Retrieved from "http://wsn.cse.wustl.edu/index.php?title=Tips_on_Using_Imote2&oldid=470"