Installing Blink on the Imote2 (TinyOS 2.x)
From Cyber-Physical Systems Laboratory
Jump to navigationJump to search
The following is the output of a successful installation of Blink using TinyOS 2.x on an IntelMote2:
make intelmote2 debug install bootloader
/opt/tinyos-2.x-contrib/intelmote2/support/make/bootloader.extra:14: warning: ov
erriding commands for target `program'
/opt/tinyos-2.x/support/make/pxa27x/jflashmm.extra:13: warning: ignoring old com
mands for target `program'
/opt/tinyos-2.x-contrib/intelmote2/support/make/bootloader.extra:18: warning: ov
erriding commands for target `program_input'
/opt/tinyos-2.x/support/make/pxa27x/jflashmm.extra:18: warning: ignoring old com
mands for target `program_input'
/opt/tinyos-2.x-contrib/intelmote2/support/make/intelmote2.extra:41: warning: ov
erriding commands for target `bytes'
/opt/tinyos-2.x/support/make/pxa27x/pxa27x.rules:102: warning: ignoring old comm
ands for target `bytes'
mkdir -p build/intelmote2
echo -mcpu=iwmmxt -mfpu=softfpa -defsym BOOTLOADER=1 /opt/tinyos-2.x-contrib/i
ntelmote2/tos/platforms/intelmote2/toscrt0.s /opt/tinyos-2.x-contrib/intelmote2/
tos/chips/pxa27x/pxa27x_util.s /opt/tinyos-2.x-contrib/intelmote2/tos/chips/pxa2
7x/mmu_table.s -o build/intelmote2/asms.o
-mcpu=iwmmxt -mfpu=softfpa -defsym BOOTLOADER=1 /opt/tinyos-2.x-contrib/intelmot
e2/tos/platforms/intelmote2/toscrt0.s /opt/tinyos-2.x-contrib/intelmote2/tos/chi
ps/pxa27x/pxa27x_util.s /opt/tinyos-2.x-contrib/intelmote2/tos/chips/pxa27x/mmu_
table.s -o build/intelmote2/asms.o
compiling BlinkAppC to a intelmote2 binary
ncc -o build/intelmote2/main.exe -g -fnesc-no-inline -I/opt/tinyos-2.x-contrib/i
ntelmote2/tos/platforms/intelmote2/chips/da9030 -I/opt/tinyos-2.x-contrib/intelm
ote2/tos/platforms/intelmote2 -I/opt/tinyos-2.x-contrib/intelmote2/tos/chips/pxa
27x -I/opt/tinyos-2.x-contrib/intelmote2/tos/sensorboards/im2cb -I/opt/tinyos-2.
x-contrib/intelmote2/tos/sensorboards/xbow_cb -I/opt/tinyos-2.x-contrib/intelmot
e2/tos/platforms/intelmote2/chips/da9030 -I/opt/tinyos-2.x-contrib/intelmote2/to
s/platforms/intelmote2 -I/opt/tinyos-2.x-contrib/intelmote2/tos/chips/pxa27x -I/
opt/tinyos-2.x-contrib/intelmote2/tos/chips/ov7649 -I/opt/tinyos-2.x-contrib/int
elmote2/tos/chips/ov7670 -Wall -Wshadow -Wnesc-all -target=intelmote2 -fnesc-cfi
le=build/intelmote2/app.c -board= -DDEFINED_TOS_AM_GROUP=0x22 -DBOOTLOADER -T/op
t/tinyos-2.x-contrib/intelmote2/tos/platforms/intelmote2/tos.x -DSYSTEM_CORE_FRE
QUENCY=13 -DSYSTEM_BUS_FREQUENCY=13 BlinkAppC.nc -lm /opt/tinyos-2.x-contrib/i
ntelmote2/tos/platforms/intelmote2/toscrt0.s /opt/tinyos-2.x-contrib/intelmote2/
tos/chips/pxa27x/pxa27x_util.s /opt/tinyos-2.x-contrib/intelmote2/tos/chips/pxa2
7x/mmu_table.s
compiled BlinkAppC to build/intelmote2/main.exe
49756 bytes in ROM
230 bytes in RAM
9216 bytes in STACK
252698 bytes available in HEAP
xscale-elf-objcopy --output-target=binary build/intelmote2/main.exe build/intelm
ote2/main.bin.out
installing intelmote2 binary using the USB boot loader
/opt/tinyos-2.x-contrib/intelmote2/tools/platforms/intelmote2/bootloader//USBLoa
derHost.exe -p build/intelmote2/main.bin.out
Program Mode, File name = build/intelmote2/main.bin.out
File Size 49756
Device detected
Device detected
GET_IMAGE_DETAILS Received.
ImgSize=49756, Num Packets= 816
Total Packets Uploaded = 0, 0.00% completed
Sending CRC Check command 46326
Total Packets Uploaded = 546, 66.00% completed
Sending CRC Check command 58917
Image Download Completed
CRC of the Image = 57561, Total Size = 49756
Time taken for Upload 3674 Milli Seconds
Image Verification Completed.
Loading Image to boot location and marking it as golden.
Time Elapsed till IMG_VERIFY 6252 Milli Seconds
Time Elapsed 8815 Milli Seconds
Successfully copied image to boot location.
Mapped Boot Image to golden. Booting New Image.
Overall Time Elapsed 11299 Milli Seconds