Equipment for course projects

From Cyber-Physical Systems Laboratory
Revision as of 22:00, 10 November 2011 by Msha (talk | contribs)
Jump to navigationJump to search

The following is a list of sensor network equipment available for use in students' course projects.

Processor and Radio Boards

  • MPR410CB Mica2 mote, 433Mhz radio, quantity: 56
MICA-Family.jpg


MTS400 Sm.jpg


Telos SM.jpg


Tmote-sky-blue.gif


(Note: the Tmote Sky and TelosB are functionally equivalent. Any hardware or software information about the TelosB motes also applies to the Tmote Sky.)

  • TelosB/Tmote Sky IEEE 802.15.4 radio, with temperature, light, and humidity sensors, quantity: 20

Mote Programming Boards

Note that programming boards are not required for the TelosB or Tmote Sky motes.

Mpr510.jpg


Sensor Boards

  • MTS310CA Multi-Sensor Board for Mica family, with speaker, quantity: 3
MTS310CASensorBoard Sm.jpg


  • MTS310CA Multi-Sensor Board for Mica family, with accelerometer and magnetometer, quantity: 2
MICAz Sm.jpg


MDA300CA Sm.jpg


SBTwT2.jpg


(For reliability, you may need to solder a socket onto the TelosB expansion header.)

Robots

R141-PPRK-BS-2.jpg


9797-0000-xx-12-1.jpg


Other Available Equipment

Nslu2.png


EC20 small.jpg


TinyOS 1.x-Only Equipment

This equipment is not supported by TinyOS 2.0. The TA will be unable to offer assistance with TinyOS 1.x. We offer this equipment for advanced students who are willing to debug their projects without the TA's assistance.

Cricket.jpg


This equipment was made possible by NSF ITR Grant CCR-0325529.