Equipment for course projects

From Cyber-Physical Systems Laboratory
Jump to navigationJump to search

The following is a list of sensor network equipment available for use in students' course projects.

TelosB-Family

TelosB data sheet IEEE 802.15.4 radio, TI MSP430 uProcessor, Integrated antenna, Integrated USB (no need for a programming board).

Sensors: Temperature, light, and humidity.

Quantity: 43

Telos SM.jpg


Tmote-sky-blue.gif


The Tmote Sky and TelosB are functionally equivalent. Any hardware or software information about the TelosB motes also applies to the Tmote Sky.


Sensors: Visual light, infrared, acoustic, temperature, dual-axis magnetometer and dual-axis accelerometer.

Quantity: 3 (1 is soldered and need to be removed). More can be ordered. (For reliability, you may need to solder a socket onto the TelosB expansion holes on the PCB.)

Sample code

SBTwT2.jpg



MICA-Family

IEEE 802.15.4 radio, Atmel ATmega128 uProcessor, requires a programming board.

Quantity: 32

MTS400 Sm.jpg


Quantity: 7, only 5 power supplies, and no cables. Also available 4 boards with unknown function (should not be hard to find out).

Mpr510.jpg


Dual-Axis Accelerometer, Dual-Axis Magnetometer, Light, Temperature, Acoustic, and Sounder.

Quantity: 6 (1 wo Mic.)

Temperature, Humidity, Barometric Pressure Ambient Light Sensors, Dual-Axis Accelerometer, and GPS

Quantity: 1


MTS310CASensorBoard Sm.jpg


Robots

R141-PPRK-BS-2.jpg


9797-0000-xx-12-1.jpg


Other Available Equipment

Nslu2.png


  • Protoboards (Breadboards)

Quantity: 6

Breadboard.jpg


  • Wall plug to USB adapter

Quantity: 29

Wall plug to USB adapter.png


  • Particle sensor

Specs

Quantity: 1

PARTICLE SENSOR, Shinyei PPD42.png


  • Power meter

Desc.

Quantity: 1

Error creating thumbnail: Unable to save thumbnail to destination





  • Car OBD-II devices
    • 2 "OBD-II to DB9" cables.
    • "OBD-II to UART" kits
      • 2 sparkfun brand OBD-II UART boards
      • 2 USB-UART serial converters
      • 2 ribbon cables.