Equipment for course projects
The following is a list of sensor network equipment available for use in students' course projects.
Raspberry Pi Family
Raspberry Pi 1, Model B:
Quantity: 10
Raspberry Pi 2/3, Model B+:
Quantity: 1 for RP2 , 2 for RP3
Know more about differences among models: Which Model Should You Buy
USB WiFi Adaptors: 6
Note: RP1 and RP2 have no embedded WiFi chip. That is, you need use Ethernet cable for accessing the Internet, or to use an additional USB Wifi adaptor for wireless accesses.
RP3 has equipped with WiFi Chip and Antenna. You don't need an extra Wifi Adaptor for RP3.
TelosB-Family
At a high level the TelosB motes have: IEEE 802.15.4 radio, TI MSP430 uProcessor, Integrated antenna, Integrated USB (no need for a programming board).
Sensors: Temperature, light, and humidity.
Quantity: 41
The Tmote Sky and TelosB are functionally equivalent. Any hardware or software information about the TelosB motes also applies to the Tmote Sky.
Robots
LeJOS firmware:File:Lego.pdf
Quantity: 2
Other Available Equipment
Quantity: 13
(Linux firmware/hardware hacking information)
- Protoboards (Breadboards)
Quantity: 4
- Wall plug to USB adapter
Quantity: 29
- Particle sensor
Quantity: 1
- Motion sensor
Works by PIR (Passive InfraRed) Desc.
Quantity: 16
- AC Zone dampers
Quantity: 1
- Programmable AC vent
Quantity: 7
