Tips on Using Imote2

From Cyber-Physical Systems Laboratory

Revision as of 19:39, 16 January 2008 by Liangfok (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Toggling an External Pin on the Imote2
When sending over UART, make sure the debug board is connected.
In TinyOS, TOS_LOCAL_ADDRESS is the last 2 digits of the mote id in hex

Retrieved from "http://wsn.cse.wustl.edu/index.php?title=Tips_on_Using_Imote2&oldid=421"

Navigation menu